Index / People / Full-time Faculty
Full-time Faculty
黃柏維Po-Wei Huang
Job_title
Assistant Professor
Education
PhD of mechanical engineering, National Cheng Kung University
E-mail
11302010@gs.ncku.edu.tw
Phone
Office(62246/61130)、Laboratory(62159-86)
Lab
Office(91604)、Laboratory(91C09)
Expertise
1. Motor system design and development
2. Mechanical and electrical integration
3. Magnetic circuit design and analysis
Papers
1 P. Huangand M. Tsai, "Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function," Magnetics, IEEE Transactions on, vol.48, no.11, pp.4622,4625, Nov. 2012
2 P. Huangand M. Tsai, "Investigation of V-Shaped Line Start Permanent Magnet Motors Based on Reactance Effect," Magnetics, IEEE Transactions on , vol.49, no.5, pp.2311,2314, May 2013
3 W. Tai; M. Tsai; Z. Gaing;P. Huang and Y. Hsu, "Novel Stator Design of Double Salient Permanent Magnet Motor," Magnetics, IEEE Transactions on , vol.50, no.4, pp.1,4, April 2014
4. P. Huangand M. Tsai, "Actuator Design Based on Flux Path Switching for High Energy Utilization," in Magnetics, IEEE Transactions on , vol.51, no.11, pp.1-4, Nov. 2015
5. P. Huang, M. Tsai and I. Jiang, "3-D Structure Line-Start Synchronous Reluctance Motor Design Based on Selective Laser Melting of 3-D Printing," in IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1-4, Nov. 2018, Art no. 8206604.
6. P. Huang, I. Jiang, M. Tsai and G. Chen, "New Hybrid Stator Design for High-Speed PMSMS Based on Selective Laser Melting of 3-D Printing," in IEEE Transactions on Magnetics, vol. 55, no. 7, pp. 1-4, July 2019, Art no. 8203404.
7. S. T. Wu, P. W. Huang, T. W. Chang, I. H. Jiang and M. C. Tsai, "Application of Magnetic Metal 3-D Printing on the Integration of Axial-Flow Impeller Fan Motor Design," in IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1-5, Feb. 2021, Art no. 8201205.
8. T. W. Chang, P. W. Huang and et al., "Fabrication of Non-Contact Magnetic Screws by Additive Manufacturing," in IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 1-5, Aug. 2022, Art no. 8001805, doi: 10.1109/TMAG.2022.3149627.
9. T. A. Huynh, J. X. Peng, M. F. Hsieh and P. W. Huang, "Anti-Demagnetization Analysis of Fractional Slot Concentrated Windings Interior Permanent Magnet Motor Considering Effect of Rotor Design Parameters," in IEEE Transactions on Magnetics, vol. 58, no. 2, pp. 1-6, Feb. 2022, Art no. 8201606, doi: 10.1109/TMAG.2021.3090319.
10. T. A. Huynh, Y. T. N. Le, Z. Lee, M. C. Tsai, P. W. Huang and M. F. Hsieh, "Influence of Flux Barriers and Permanent Magnet Arrangements on Performance of High-Speed Flux-Intensifying IPM Motor," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290538.
11. P. W. Huang, T. W. Chang, W. H. Yang, Y. C. Wu and M. C. Tsai, "A Novel S-Shape Offset Type of a Modulated Ferromagnetic Pole Piece Design for a Pseudo Direct Drive Motor," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290599.
12. T. W. Chang, P. W. Huang, W. C. Huang, C. C. Huang, C. C. Mo and M. C. Tsai, "Additive Manufacturing High Fault-tolerant Axial Flux Variable Reluctance Resolver," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290606.
 
13. P. H. Liao, M. C. Tsai, H. C. Lu, P. W. Huang and T. W. Chang, "Cycloidal Magnetic Gear Utilizing Magnetic Repulsion Characteristics," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2024.3404003
14. T. W. Chang, P. W. Huang, C. H. Shih, A. Hung, C. C. Wang, H. F. Ko and M. C. Tsai, "Additive Manufacturing High Current Power Inductor," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2024.3404430.
Symposium Paper
1. Po-Wei Huang, Shang-Hsun Mao, Mi-Ching Tsai, Cheng-Tsung Liu, ” Investigation of Line Start Permanent Magnet Synchronous Motors with Interior-Magnet Rotors and Surface-Magnet Rotors” ,International Conference on Electrical Machines and Systems 2008, Aug. 2008. Wuhan, China.
2. Po-Wei Huang, Shang-Hsun Mao, Mi-Ching Tsai, “Reactance effect of a line start permanent magnet motor,” The 19th Soft Magnetic material Conference, Sep. 2009. Torino, Italy.
3. Po-Wei Huang, Mi-Ching Tsai, M.Y. Cheng, “Analysis of Iron Losses in a wheel motor with high quality silicon steel plates,” The SICE Annual Conference 2010, Aug. 2010. Taipei, Taiwan.
4. Po-Wei Huang, Shang-Hsun Mao and Mi-Ching Tsai, “Investigation of Inductance Variation with Rotor Eccentricity for Permanent Magnet Motors,” International Conference on Electrical Machines and Systems 2010, Sep. 2010. Seoul, Korea.
5. Po-Wei Huangand Mi-Ching Tsai, “Magnetic-controlled Actuators with Auto-locking Function for On-body Power Assistive Devices ,” The 20th Soft Magnetic material Conference, Sep. 2011. Kos, Greece.
6. Po-Wei Huang andMi-Ching Tsai, "Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function," Intermag 2012,. May. 2012. Vancouver, Canada.
7. Po-Wei Huang andMi-Ching Tsai, “Investigation of V-Shaped Line Start Permanent Magnet Motors Based on Reactance Effect,” 15th Biennial IEEE Conference on Electromagnetic Field Computation, Oct. 2012. Oita, Japan.
8. Po-Wei Huangand Mi-Ching Tsai, “Design of a high energy utilization efficiency actuator based on a flux path switching device,” The 21th Soft Magnetic material Conference, Sep. 2013. Budapest, Hungary.
9. Po-Wei Huangand Mi-Ching Tsai, "Actuator Design Based on Flux Path Switching for High Energy Utilization," Intermag 2015, May. 2015. Beijing, China.
10 Guan-Min Tseng, Mi-Ching Tsai,Po-Wei Huangand Wen-Hsi Lee," A Magnetic Coupling Design Based On Additive Manufacturing,”ICEMS 2015,. Oct. 2015. Pattaya, Tailand.
11 Zhi-Yong Zhang, Mi-Ching Tsai,Po-Wei Huangand Chung-Wei Cheng, " Investigation of Transversally and Axially Laminated Anisotropic Synchronous Reluctance Motor Based on 3D Printing” ICEMS 2015,. Oct. 2015. Pattaya, Tailand.
12 Z. Zhang, K. J. Jhong, C. Cheng, P. Huang, M. Tsai and W. Lee, "Metal 3D printing of synchronous reluctance motor," 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, 2016, pp. 1125-1128.
13 M. Tsai, Y. Wu, C. Chan, P. Cai, P. Huangand M. Tsai, "Integrated Design of Magnetic Gear and Electric Motor for Electric Vehicles," 2016 International Conference of Asian Union of Magnetics Societies (ICAUMS), Tainan, 2016, pp. 1-4.
14 P. Huang, Z. Zhang, W. Lin and M. Tsai, "Investigation of reluctance integrated starter/generator based on higher rotor pole number and dual air gaps design," 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, 2016, pp. 1-4.
15 G. Tseng, K. Jhong, M. Tsai, P. Huangand W. Lee, "Application of additive manufacturing for low torque ripple of 6/4 switched reluctance motor," 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, 2016, pp. 1-4.
16 P. Huang, M. Tsai and C. U. Ubadigha, "Investigation of high power density permanent magnet integrated starter/generator based on dual air-gap design," 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, 2017, pp. 1-4.
17 M. Tsai, P. Huangand M. Tsai, "Research of Axial-Radial Flux Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design," 2018 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, 2018, pp. 261-264.
18. K. L. Hsu, I. H. Jiang, P. W. Huang, C. U. Ubadigha and M. C. Tsai, "Investigation of Dual Stator Design for Integrated Starter-Generator with X-Shape Magnets," 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan, 2020, pp. 1-4,
19. P. W. Huang, I. H. Jiang, T. W. Chang, H. H. Huang, C. U. Ubadigha and M. C. Tsai
, "Design and Implementation of New Axial-Radial Bevel Magnetic Gear Based on Magnetic 3D Printing," 2021 IEEE International Magnetic Conference (Intermag), Lyon, France, May. 2021.
20. P.W. Huang, T. W. Chang, C. U. Ubadigha, C. C. Chang,I. H. Jiang, M. F. Hsieh and M. C. Tsai, "Centrifugal Pump Integrated Axial Flux Switching Permanent Magnet Motor Based on Magnetic 3D Printing," 2022 Joint MMM-Intermag Conference, New Orleans, United States, Jan. 2022.